board/gale/defconfig

   1 # Arch
   2 CONFIG_ARCH_ARM=y
   3
   4 # Board
   5 CONFIG_BOARD="gale"
   6
   7 # Documentation/arm/Booting says:
   8 #  The kernel should be placed in the first 128MiB of RAM. It is recommended
   9 #  that it is loaded above 32MiB in order to avoid the need to relocate prior
  10 #  to decompression, which will make the boot process slightly faster.
  11 # KERNEL_START is where the (compressed) kernel blob is loaded.
  12
  13 # Image
  14 CONFIG_BASE_ADDRESS=0x88000000
  15 CONFIG_FMAP_OFFSET=0x00300000
  16 CONFIG_HEAP_SIZE=0x01200000
  17 CONFIG_KERNEL_START=0x80208000
  18
  19 # Vboot
  20 CONFIG_VIRTUAL_DEV_SWITCH=y
  21 CONFIG_USB_BOOT_ON_DEV=y
  22
  23 CONFIG_CROSSYSTEM_FDT=y
  24
  25 # Kernel format
  26 CONFIG_KERNEL_FIT=y
  27 CONFIG_KERNEL_FIT_FDT_ADDR=0x86000000
  28
  29 # Drivers
  30 CONFIG_DRIVER_BUS_I2C_IPQ40XX=y
  31 CONFIG_DRIVER_BUS_SPI_IPQ40XX=y
  32 CONFIG_DRIVER_FLASH_SPI=y
  33 CONFIG_DRIVER_GPIO_IPQ40XX=y
  34 CONFIG_DRIVER_INPUT_USB=y
  35 CONFIG_DRIVER_POWER_IPQ40XX=y
  36 CONFIG_DRIVER_SOUND_ROUTE=y
  37 CONFIG_DRIVER_STORAGE_IPQ_40XX=y
  38 CONFIG_DRIVER_STORAGE_MMC=y
  39 CONFIG_DRIVER_TPM_SLB9635_I2C=y
  40 # CONFIG_DRIVER_VIDEO_WW_RING=y
  41
  42 CONFIG_HEADLESS=y
  43 CONFIG_NV_STORAGE_FLASH=y
  44
  45 CONFIG_MACHID=0x1260
  46 CONFIG_ATAG_BASE=0x8f000000
  47
  48 CONFIG_DRIVER_STORAGE_MTD_STREAM=y
  49 CONFIG_DRIVER_STORAGE_SPI_GPT=y
  50 CONFIG_DRIVER_STORAGE_MTD_IPQ_NAND=y