Gale: Add LED support.
[depthcharge.git] / board / gale / defconfig
1 # Arch
2 CONFIG_ARCH_ARM=y
3
4 # Board
5 CONFIG_BOARD="gale"
6
7 # Documentation/arm/Booting says:
8 #  The kernel should be placed in the first 128MiB of RAM. It is recommended
9 #  that it is loaded above 32MiB in order to avoid the need to relocate prior
10 #  to decompression, which will make the boot process slightly faster.
11 # KERNEL_START is where the (compressed) kernel blob is loaded.
12
13 # Image
14 CONFIG_BASE_ADDRESS=0x88000000
15 CONFIG_FMAP_OFFSET=0x00300000
16 CONFIG_HEAP_SIZE=0x01200000
17 CONFIG_KERNEL_START=0x80208000
18
19 # Vboot
20 CONFIG_VIRTUAL_DEV_SWITCH=y
21 CONFIG_USB_BOOT_ON_DEV=y
22
23 CONFIG_CROSSYSTEM_FDT=y
24
25 # Kernel format
26 CONFIG_KERNEL_FIT=y
27 CONFIG_KERNEL_FIT_FDT_ADDR=0x86000000
28
29 # Drivers
30 CONFIG_DRIVER_BUS_I2C_IPQ40XX=y
31 CONFIG_DRIVER_BUS_SPI_IPQ40XX=y
32 CONFIG_DRIVER_FLASH_SPI=y
33 CONFIG_DRIVER_GPIO_IPQ40XX=y
34 CONFIG_DRIVER_INPUT_USB=y
35 CONFIG_DRIVER_POWER_IPQ40XX=y
36 CONFIG_DRIVER_SOUND_ROUTE=y
37 CONFIG_DRIVER_STORAGE_IPQ_40XX=y
38 CONFIG_DRIVER_STORAGE_MMC=y
39 CONFIG_DRIVER_TPM_SLB9635_I2C=y
40 CONFIG_DRIVER_VIDEO_WW_RING=y
41
42 CONFIG_HEADLESS=y
43 CONFIG_NV_STORAGE_FLASH=y
44
45 CONFIG_MACHID=0x1260
46 CONFIG_ATAG_BASE=0x8f000000
47
48 CONFIG_DRIVER_STORAGE_MTD_STREAM=y
49 CONFIG_DRIVER_STORAGE_SPI_GPT=y
50 CONFIG_DRIVER_STORAGE_MTD_IPQ_NAND=y