dm: Move CONFIG_I2C_COMPAT to Kconfig
[u-boot-sniper.git] / include / configs / odroid.h
1 /*
2  * Copyright (C) 2014 Samsung Electronics
3  * Sanghee Kim <sh0130.kim@samsung.com>
4  * Piotr Wilczek <p.wilczek@samsung.com>
5  * Przemyslaw Marczak <p.marczak@samsung.com>
6  *
7  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef __CONFIG_ODROID_U3_H
13 #define __CONFIG_ODROID_U3_H
14
15 #include <configs/exynos4-common.h>
16
17 #define CONFIG_SYS_PROMPT       "Odroid # "     /* Monitor Command Prompt */
18
19
20 #define CONFIG_SYS_L2CACHE_OFF
21 #ifndef CONFIG_SYS_L2CACHE_OFF
22 #define CONFIG_SYS_L2_PL310
23 #define CONFIG_SYS_PL310_BASE   0x10502000
24 #endif
25
26 #define CONFIG_MACH_TYPE        4289
27
28 #define CONFIG_NR_DRAM_BANKS    8
29 #define CONFIG_SYS_SDRAM_BASE   0x40000000
30 #define SDRAM_BANK_SIZE         (256 << 20)     /* 256 MB */
31 #define PHYS_SDRAM_1            CONFIG_SYS_SDRAM_BASE
32
33 /* memtest works on */
34 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
35 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
36 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
37 #define CONFIG_SYS_TEXT_BASE            0x43e00000
38
39 #include <linux/sizes.h>
40
41 /* select serial console configuration */
42 #define CONFIG_SERIAL1
43 #define CONFIG_BAUDRATE                 115200
44
45 /* Console configuration */
46 #define CONFIG_SYS_CONSOLE_INFO_QUIET
47 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
48
49 #define CONFIG_CMD_BOOTZ
50 #define CONFIG_FIT
51 #define CONFIG_FIT_VERBOSE
52 #define CONFIG_BOOTARGS                 "Please use defined boot"
53 #define CONFIG_BOOTCOMMAND              "run autoboot"
54 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
55
56 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
57                                         - GENERATED_GBL_DATA_SIZE)
58
59 #define CONFIG_SYS_MEM_TOP_HIDE (SZ_1M) /* ram console */
60
61 #define CONFIG_SYS_MONITOR_BASE 0x00000000
62
63 #define CONFIG_ENV_IS_IN_MMC
64 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
65 #define CONFIG_ENV_SIZE                 4096
66 #define CONFIG_ENV_OFFSET               (SZ_1K * 1280) /* 1.25 MiB offset */
67 #define CONFIG_ENV_OVERWRITE
68
69 /* Partitions name */
70 #define PARTS_BOOT              "boot"
71 #define PARTS_ROOT              "platform"
72
73 #define CONFIG_DFU_ALT \
74         "uImage fat 0 1;" \
75         "zImage fat 0 1;" \
76         "Image.itb fat 0 1;" \
77         "uInitrd fat 0 1;" \
78         "exynos4412-odroidu3.dtb fat 0 1;" \
79         "exynos4412-odroidx2.dtb fat 0 1;" \
80         ""PARTS_BOOT" part 0 1;" \
81         ""PARTS_ROOT" part 0 2\0" \
82
83 #define CONFIG_SET_DFU_ALT_INFO
84 #define CONFIG_SET_DFU_ALT_BUF_LEN      (SZ_1K)
85
86 #define CONFIG_DFU_ALT_BOOT_EMMC \
87         "u-boot raw 0x3e 0x800 mmcpart 1;" \
88         "bl1 raw 0x0 0x1e mmcpart 1;" \
89         "bl2 raw 0x1e 0x1d mmcpart 1;" \
90         "tzsw raw 0x83e 0x138 mmcpart 1\0"
91
92 #define CONFIG_DFU_ALT_BOOT_SD \
93         "u-boot raw 0x3f 0x800;" \
94         "bl1 raw 0x1 0x1e;" \
95         "bl2 raw 0x1f 0x1d;" \
96         "tzsw raw 0x83f 0x138\0"
97
98 /*
99  * Bootable media layout:
100  * dev:    SD   eMMC(part boot)
101  * BL1      1    0
102  * BL2     31   30
103  * UBOOT   63   62
104  * TZSW  2111 2110
105  * ENV   2560 2560(part user)
106  *
107  * MBR Primary partiions:
108  * Num Name   Size  Offset
109  * 1.  BOOT:  100MiB 2MiB
110  * 2.  ROOT:  -
111 */
112 #define CONFIG_EXTRA_ENV_SETTINGS \
113         "loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
114                 "${kernelname}\0" \
115         "loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
116                 "${initrdname}\0" \
117         "loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
118                 "${fdtfile}\0" \
119         "check_ramdisk=" \
120                 "if run loadinitrd; then " \
121                         "setenv initrd_addr ${initrdaddr};" \
122                 "else " \
123                         "setenv initrd_addr -;" \
124                 "fi;\0" \
125         "check_dtb=" \
126                 "if run loaddtb; then " \
127                         "setenv fdt_addr ${fdtaddr};" \
128                 "else " \
129                         "setenv fdt_addr;" \
130                 "fi;\0" \
131         "kernel_args=" \
132                 "setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
133                 " rootwait ${console} ${opts}\0" \
134         "boot_fit=" \
135                 "setenv kerneladdr 0x42000000;" \
136                 "setenv kernelname Image.itb;" \
137                 "run loadkernel;" \
138                 "run kernel_args;" \
139                 "bootm ${kerneladdr}#${boardname}\0" \
140         "boot_uimg=" \
141                 "setenv kerneladdr 0x40007FC0;" \
142                 "setenv kernelname uImage;" \
143                 "run check_dtb;" \
144                 "run check_ramdisk;" \
145                 "run loadkernel;" \
146                 "run kernel_args;" \
147                 "bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
148         "boot_zimg=" \
149                 "setenv kerneladdr 0x40007FC0;" \
150                 "setenv kernelname zImage;" \
151                 "run check_dtb;" \
152                 "run check_ramdisk;" \
153                 "run loadkernel;" \
154                 "run kernel_args;" \
155                 "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
156         "autoboot=" \
157                 "if test -e mmc 0 Image.itb; then; " \
158                         "run boot_fit;" \
159                 "elif test -e mmc 0 zImage; then; " \
160                         "run boot_zimg;" \
161                 "elif test -e mmc 0 uImage; then; " \
162                         "run boot_uimg;" \
163                 "fi;\0" \
164         "console=" CONFIG_DEFAULT_CONSOLE \
165         "mmcbootdev=0\0" \
166         "mmcbootpart=1\0" \
167         "mmcrootdev=0\0" \
168         "mmcrootpart=2\0" \
169         "bootdelay=0\0" \
170         "dfu_alt_system="CONFIG_DFU_ALT \
171         "dfu_alt_info=Please reset the board\0" \
172         "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
173         "consoleoff=set console console=ram; save; reset\0" \
174         "initrdname=uInitrd\0" \
175         "initrdaddr=42000000\0" \
176         "fdtaddr=40800000\0"
177
178 /* I2C */
179 #define CONFIG_CMD_I2C
180 #define CONFIG_SYS_I2C_S3C24X0
181 #define CONFIG_SYS_I2C_S3C24X0_SPEED    100000
182 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0
183
184 /* POWER */
185 #define CONFIG_POWER
186 #define CONFIG_POWER_I2C
187 #define CONFIG_POWER_MAX77686
188
189 /* GPT */
190 #define CONFIG_RANDOM_UUID
191
192 /* Security subsystem - enable hw_rand() */
193 #define CONFIG_EXYNOS_ACE_SHA
194 #define CONFIG_LIB_HW_RAND
195
196 #define CONFIG_CMD_GPIO
197
198 /* USB */
199 #define CONFIG_CMD_USB
200 #define CONFIG_USB_EHCI
201 #define CONFIG_USB_EHCI_EXYNOS
202 #define CONFIG_USB_STORAGE
203
204 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
205 #define CONFIG_CMD_NET
206 #define CONFIG_CMD_PING
207 #define CONFIG_CMD_DHCP
208 #define CONFIG_USB_HOST_ETHER
209 #define CONFIG_USB_ETHER_SMSC95XX
210
211 /*
212  * Supported Odroid boards: X3, U3
213  * TODO: Add Odroid X support
214  */
215 #define CONFIG_MISC_COMMON
216 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
217 #define CONFIG_BOARD_TYPES
218 #define CONFIG_MISC_INIT_R
219
220 #undef CONFIG_REVISION_TAG
221
222 #endif  /* __CONFIG_H */