u-boot.git
4 years agodebug kc1-recovery
Paul Kocialkowski [Fri, 19 Feb 2016 21:43:05 +0000 (22:43 +0100)]
debug

4 years agoWorking USB on usb boot
Paul Kocialkowski [Wed, 17 Feb 2016 18:09:33 +0000 (19:09 +0100)]
Working USB on usb boot

4 years agoWIP: omap-common: UART boot
Paul Kocialkowski [Sun, 14 Feb 2016 21:11:44 +0000 (22:11 +0100)]
WIP: omap-common: UART boot

4 years agoAmazon Kindle Fire (first generation) codename kc1 support
Paul Kocialkowski [Sun, 14 Feb 2016 21:08:25 +0000 (22:08 +0100)]
Amazon Kindle Fire (first generation) codename kc1 support

The Amazon Kindle Fire (first generation) codename kc1 is a tablet that was
released by Amazon back in 2011.

It is using an OMAP4430 SoC GP version, which allows running U-Boot and the
U-Boot SPL from the ground up.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agoomap-common: Remove deprecated arch_cpu_init code
Paul Kocialkowski [Sun, 14 Feb 2016 19:30:50 +0000 (20:30 +0100)]
omap-common: Remove deprecated arch_cpu_init code

save_omap_boot_params is called from spl_board_init in the SPL context. Thus,
there is no reason to duplicate that call on arch_cpu_init.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agoomap-common: Rename set_muxconf_regs_essential to set_muxconf_regs
Paul Kocialkowski [Sun, 14 Feb 2016 17:48:42 +0000 (18:48 +0100)]
omap-common: Rename set_muxconf_regs_essential to set_muxconf_regs

There is no distinction between essential and non-essential mux configuration,
so it doesn't make sense to have an "essential" prefix.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agoomap4: Export jedec sdram timings
Paul Kocialkowski [Sun, 14 Feb 2016 16:09:45 +0000 (17:09 +0100)]
omap4: Export jedec sdram timings

Individual boards might provide their own emif_get_device_timings function and
use the jedec timings in their own way, hence those have to be exported.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agoomap4: Export elpidia sdram timings
Paul Kocialkowski [Sun, 14 Feb 2016 16:08:52 +0000 (17:08 +0100)]
omap4: Export elpidia sdram timings

Individual boards might provide their own emif_get_device_timings function and
use the elpidia timings in their own way, hence those have to be exported.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agoomap4: Export elpidia sdram device details
Paul Kocialkowski [Sun, 14 Feb 2016 16:01:37 +0000 (17:01 +0100)]
omap4: Export elpidia sdram device details

Individual boards might provide their own emif_get_device_details function and
use elpidia device details in their own way, hence those have to be exported.

This also wraps existing definitions with the proper ifdef logic.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agoomap_hsmmc: Board-specific TWL6030 MMC power initializations
Paul Kocialkowski [Sat, 13 Feb 2016 21:19:56 +0000 (22:19 +0100)]
omap_hsmmc: Board-specific TWL6030 MMC power initializations

Boards using the TWL6030 regulator may not all use the LDOs the same way.
Some might also not use MMC1 at all, so VMMC would't have to be enabled.

This delegates TWL6030 MMC power initializations to board-specific functions,
that may still call twl6030_power_mmc_init for the default behavior.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agopower: twl6030: More explicit registers and values definitions
Paul Kocialkowski [Sat, 13 Feb 2016 20:34:44 +0000 (21:34 +0100)]
power: twl6030: More explicit registers and values definitions

This makes the twl6030 power registers and values definitions more explicit
and clear and adds prefixes to them.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agosniper: Various minor cleanups, missing Kconfig configs and reorganisation
Paul Kocialkowski [Sun, 14 Feb 2016 21:06:24 +0000 (22:06 +0100)]
sniper: Various minor cleanups, missing Kconfig configs and reorganisation

This introduces some minor cleanups, regarding aspects such as board name, code
and headers organization as well as deprecated and missing config options.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
4 years agoMerge branch 'master' of git://git.denx.de/u-boot-video
Tom Rini [Thu, 11 Feb 2016 23:18:15 +0000 (18:18 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-video

4 years agovideo: tegra: Enable the 'lcd' env variable work-around
Simon Glass [Sat, 6 Feb 2016 21:31:38 +0000 (14:31 -0700)]
video: tegra: Enable the 'lcd' env variable work-around

Enable this option on all tegra boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
4 years agodm: video: Add a temporary work-around for old stdout var
Simon Glass [Sat, 6 Feb 2016 21:31:37 +0000 (14:31 -0700)]
dm: video: Add a temporary work-around for old stdout var

Boards with a saved environment may use 'lcd' in their stdout environment
variable, expecting that this will enable output to the LCD. When the board
moves to use driver model for video, this will no-longer work. Add a
work-around to fix this. A warning messages is printed, and we will remove
the work-around at the end of 2016.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
4 years agoRevert "common/memsize.c: Simplify RAM size detection"
Hans de Goede [Tue, 9 Feb 2016 21:38:31 +0000 (22:38 +0100)]
Revert "common/memsize.c: Simplify RAM size detection"

This commit breaks bootup on sunxi boards, the get stuck
when running the main u-boot binary at:

CPU:   Allwinner H3 (SUN8I)
I2C:   ready
DRAM:

This reverts commit 8e7cba048baae68ee0916a8f52b4304277328d5e.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
4 years agotest/py: capture the entire U-Boot version at boot
Stephen Warren [Sat, 6 Feb 2016 01:04:43 +0000 (18:04 -0700)]
test/py: capture the entire U-Boot version at boot

The existing regex simply ensures that the captured version string doesn't
go past the end of a line. We really want to grab as much as possible. Do
this by explicitly including a ) character at the end of the regex to
match the last character of the version test.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
4 years agotest/py: fix off-by-one error in spawn matching code
Stephen Warren [Sat, 6 Feb 2016 01:04:42 +0000 (18:04 -0700)]
test/py: fix off-by-one error in spawn matching code

A regex match object's .end() value is already the index after the match,
not the index of the last character in the match, so there's no need to
add 1 to point past the match.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
4 years agotest/py: HTML awesome!
Stephen Warren [Wed, 3 Feb 2016 23:46:34 +0000 (16:46 -0700)]
test/py: HTML awesome!

Implement three improvements to the HTML log file:
- Ability to expand/contract sections. All passing sections are contracted
  at file load time so the user can concentrate on issues requiring
  action.
- The overall status report is copied to the top of the log for easy
  access.
- Add links from the status report to the test logs, for easy navigation.

This all relies on Javascript and the jquery library. If the user doesn't
have Javascript enabled, or jquery can't be downloaded, the log should
look and behave identically to how it did before this patch.

A few notes on the diff:

- A few more 'with log.section("xxx")' were added, so that all stream
  blocks are kept within a section block for consistent HTML entity
  nesting structure. This changed indentation in a few places, making
  the diff look slightly larger.
- HTML entity IDs are cleaned up. We assign simple incrementing integer
  IDs now, rather than using mangled test names which were possibly
  invalid.
- Sections and streams now use common CSS class names (in addition to the
  current separate class names) to more easily share the new behaviour.
  This also reduces the CSS file size since rules don't need to be
  duplicated.
- An "OK" status is logged after some external command executions so that
  make and flash steps are auto-contracted at log file load time, assuming
  they passed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
4 years agotest/py: exit(1) if there are problems running py.test
Stephen Warren [Wed, 3 Feb 2016 17:42:11 +0000 (10:42 -0700)]
test/py: exit(1) if there are problems running py.test

The test/py/test.py wrapper script catches exceptions thrown when
exec()ing py.test in order to print a helpful error message. However,
the exception handling code squashes the exception and so the script
exits with a non-zero exit code, leading callers to believe that it
passed. Fix this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
4 years agoitest: allow map_physmem to return 0 in limited cases
Stephen Warren [Fri, 29 Jan 2016 23:10:04 +0000 (16:10 -0700)]
itest: allow map_physmem to return 0 in limited cases

On some systems, RAM starts at address 0. If the user executes itest
against address 0 on such a system, it will call map_physmem(0, ...)
which will return 0 back; mapping only changes the address on sandbox.
This causes itest to believe map_physmem() has failed, and hence fails
the comparison.

Fix itest so that it allows map_physmem() to return 0 /if/ the orignal
address passed to it was also 0.

This fixes "tegra-uboot-flasher flash" on Tegra20.

This has the disadvantage that on sandbox, failed mapping attempts for
address 0 are not detected. Instead, should the code only call
map_physmem() on sandbox? Or, should map_physmem() return its error status
some other way. Or, should the special case only be allowed on systems
where the base of RAM is 0 somehow?

Fixes: 7861204c9af7 ("itest: make memory access work under sandbox")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
4 years agogunzip: remove avail_in recalculation
Stephen Warren [Fri, 29 Jan 2016 20:26:58 +0000 (13:26 -0700)]
gunzip: remove avail_in recalculation

Current, the following passes:
    ./u-boot -d arch/sandbox/dts/test.dtb -c 'ut_image_decomp'
but the following fails:
    ./u-boot -d arch/sandbox/dts/test.dtb -c 'ut dm; ut_image_decomp'

This is because the gunzip code reads input data beyond the end of its
input buffer. In the first case above, this data just happens to be 0,
which just happens to trigger gzip to signal the error the decompression
unit test expects. In the second case above, the "ut dm" test has written
data to the accidentally-read memory, which causes the gzip code to take a
different path and so return a different value, which triggers the test
failure.

The cause of gunzip reading past its input buffer is the re-calculation of
s.avail_in in zunzip(), since it can underflow. Not only is the formula
non-sensical (it uses the delta between two output buffer pointers to
calculate available input buffer size), it also appears to be unnecessary,
since the gunzip code already maintains this value itself. This patch
removes this re-calculation to avoid the underflow and redundant work.

The loop exit condition is also adjusted so that if inflate() has consumed
the entire input buffer, without indicating returning Z_STREAM_END (i.e.
decompression complete without error), an error is raised. There is still
opportunity to simplify the code here by splitting up the loop exit
condition into separate tests. However, this patch makes the minimum
modifications required to solve the problem at hand, in order to keep the
Acked-by: Kees Cook <keescook@chromium.org>
diff simple.

I am not entirely convinced that the loop in zunzip() is necessary at all.
It could only be useful if inflate() can return Z_BUF_ERROR (which
typically means that it needs more data in the input buffer, or more space
in the output buffer), even though Z_FINISH is set /and/ the full input is
available in the input buffer /and/ there is enough space to store the
decompressed output in the output buffer. The comment in zlib.h after the
prototype of inflate() implies this is never the case. However, I assume
there must have been some reason for introducing this loop in the first
place, as part of commit "Fix gunzip to work for any gziped uImage size".

This patch is similar to the earlier b75650d84d4b "gzip: correctly
bounds-check output buffer", which corrected a similar issue for
s.avail_out.

Cc: Catalin Radu <Catalin@VirtualMetrix.com>
Cc: Kees Cook <keescook@chromium.org>
Fixes: f039ada5c109 ("Fix gunzip to work for any gziped uImage size")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
4 years agosniper: Drop references to P970
Paul Kocialkowski [Sun, 7 Feb 2016 15:50:50 +0000 (16:50 +0100)]
sniper: Drop references to P970

There are various different boards with the same hardware sold as LG Optimus
Black, such as P970, P970g and KU5900. Since this port is functional for all
variants, it doesn't make sense to keep references to P970.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agos3c24xx: serial: Remove dead code
David Müller (ELSOFT AG) [Sat, 6 Feb 2016 06:57:29 +0000 (07:57 +0100)]
s3c24xx: serial: Remove dead code

Signed-off-by: David Müller <d.mueller@elsoft.ch>
4 years agodoc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW...
David Müller (ELSOFT AG) [Sat, 6 Feb 2016 06:57:28 +0000 (07:57 +0100)]
doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
4 years agoRemove unused CONFIG_HWFLOW option and associated dead code.
David Müller (ELSOFT AG) [Sat, 6 Feb 2016 06:57:27 +0000 (07:57 +0100)]
Remove unused CONFIG_HWFLOW option and associated dead code.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
4 years agoRemove unused CONFIG_CMD_HWFLOW option and associated dead code.
David Müller (ELSOFT AG) [Sat, 6 Feb 2016 06:57:26 +0000 (07:57 +0100)]
Remove unused CONFIG_CMD_HWFLOW option and associated dead code.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
4 years agoRemove unused CONFIG_MODEM_SUPPORT option and associated dead code.
David Müller (ELSOFT AG) [Sat, 6 Feb 2016 06:57:25 +0000 (07:57 +0100)]
Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
4 years agoARM: rpi: set fdt_high in the default environment
Stephen Warren [Sat, 6 Feb 2016 05:45:47 +0000 (22:45 -0700)]
ARM: rpi: set fdt_high in the default environment

The ARM Linux kernel requires the DT to be in memory accessible early
during the boot process. This always happens naturally on the RPi 1,
since the maximum memory size of 512MiB, and additionally some of that
is reserved for use by the GPU. The RPi 2 has 1GiB of RAM (minus some
GPU usage), and so if the DT is relocated to the top of RAM, Linux cannot
access it. Prevent this from happening by setting fdt_high.

Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
4 years agoARM: rpi: update memory layout env. var. documentation
Stephen Warren [Sat, 6 Feb 2016 05:45:46 +0000 (22:45 -0700)]
ARM: rpi: update memory layout env. var. documentation

Update rpi-common.h's documentation that describes the rationale for
choosing various addresses for standardized variables used by boot
scripts. This comment was correct when written, but not updated when some
of the values were changed.

Fixes: 14006a567105 ("rpi: set fdt_addr_r to 0x00000100 to match default
...device_tree_address")
Cc: Jonathan Liu <net147@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
4 years agoboard_r: fix a typo in comment block
Masahiro Yamada [Fri, 5 Feb 2016 11:49:39 +0000 (20:49 +0900)]
board_r: fix a typo in comment block

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agokbuild: fix build rule of u-boot-spl.dtb
Masahiro Yamada [Fri, 5 Feb 2016 08:55:14 +0000 (17:55 +0900)]
kbuild: fix build rule of u-boot-spl.dtb

The build command of u-boot-spl.dtb is not constant, but dependent
on CONFIG_OF_SPL_REMOVE_PROPS.  Use $(call if_changed,...) so that
the change of CONFIG_OF_SPL_REMOVE_PROPS is detected.

Also, add tools/fdtgrep to the dependency to make sure u-boot-spl.dtb
is generated by the up-to-date fdtgrep in case the tool is modified.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agokbuild: add missing FORCE where $(call if_changed, ) is used
Masahiro Yamada [Fri, 5 Feb 2016 08:55:13 +0000 (17:55 +0900)]
kbuild: add missing FORCE where $(call if_changed, ) is used

FORCE is needed for $(call if_changed,...) to be evaluated every time.
Otherwise, the command is not executed when the command line has
changed but any prerequisite has not been updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agokbuild: remove unneeded ifdef conditionals around build rules
Masahiro Yamada [Fri, 5 Feb 2016 08:55:12 +0000 (17:55 +0900)]
kbuild: remove unneeded ifdef conditionals around build rules

These rules are only used for SOCFPGA, SUNXI, but no need to hide
them from other SoCs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoimage: fix getenv_bootm_size() function again
Masahiro Yamada [Fri, 5 Feb 2016 07:12:50 +0000 (16:12 +0900)]
image: fix getenv_bootm_size() function again

Commit 9c11135ce053 ("image: fix getenv_bootm_size() function") fixed
the case where "bootm_low" is defined, but "bootm_size" is not.
Instead, it broke the case where neither "bootm_low" nor "bootm_size"
is defined.  Fix this function again.

Fixes: 9c11135ce053 ("image: fix getenv_bootm_size() function")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Matthias Weisser <m.weisser.m@gmail.com>
Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
4 years agotest/py: support running sandbox under gdbserver
Stephen Warren [Thu, 4 Feb 2016 23:11:50 +0000 (16:11 -0700)]
test/py: support running sandbox under gdbserver

Implement command--line option --gdbserver COMM, which does two things:

a) Run the sandbox process under gdbserver, using COMM as gdbserver's
   communication channel.

b) Disables all timeouts, so that if U-Boot is halted under the debugger,
   tests don't fail. If the user gives up in the middle of a debugging
   session, they can simply CTRL-C the test script to abort it.

This allows easy debugging of test failures without having to manually
re-create the failure conditions. Usage is:

Window 1:
./test/py/test.py --bd sandbox --gdbserver localhost:1234

Window 2:
gdb ./build-sandbox/u-boot -ex 'target remote localhost:1234'

When using this option, it likely makes sense to use pytest's -k option
to limit the set of tests that are executed.

Simply running U-Boot directly under gdb (rather than gdbserver) was
also considered. However, this was rejected because:

a) gdb's output would then be processed by the test script, and likely
   confuse it causing false failures.

b) pytest by default hides stdout from tests, which would prevent the
   user from interacting with gdb.

   While gdb can be told to redirect the debugee's stdio to a separate
   PTY, this would appear to leave gdb's stdio directed at the test
   scripts and the debugee's stdio directed elsewhere, which is the
   opposite of the desired effect. Perhaps some complicated PTY muxing
   and process hierarchy could invert this. However, the current scheme
   is simple to implement and use, so it doesn't seem worth complicating
   matters.

c) Using gdbserver allows arbitrary debuggers to be used, even those with
   a GUI. If the test scripts invoked the debugger themselves, they'd have
   to know how to execute arbitary applications. While the user could hide
   this all in a wrapper script, this feels like extra complication.

An interesting future idea might be a --gdb-screen option, which could
spawn both U-Boot and gdb separately, and spawn the screen into a newly
created window under screen. Similar options could be envisaged for
creating a new xterm/... too.

--gdbserver  currently only supports sandbox, and not real hardware.
That's primarily because the test hooks are responsible for all aspects of
hardware control, so there's nothing for the test scripts themselves can
do to enable gdbserver on real hardware. We might consider introducing a
separate --disable-timeouts option to support use of debuggers on real
hardware, and having --gdbserver imply that option.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
4 years agomalloc: solve dead code issue in memalign()
Stephen Warren [Thu, 4 Feb 2016 18:54:20 +0000 (11:54 -0700)]
malloc: solve dead code issue in memalign()

The recent change to memalign() caused the allocation failure detection
code to be dead code; the "retry" logic is always activated under the same
condition that the original failure detection code is, and also fully
handles any possible failures. This patch solves the presence of dead
code.

Two alternatives are possible:

a) Delete the now-dead test, and rely on the "retry" path to handle any
allocation problems, as it does.

b) Make the "retry" path fall through to the existing (currently dead)
failure detection code, thus making it not-dead.

(b) was chosen since it reduces the diff between U-Boot's and the upstream
dlmalloc. This should make it marginally easier to import a new version of
dlmalloc in the future.

Reported by: Coverity Scan
Fixes: 4f144a416469 ("malloc: work around some memalign fragmentation issues")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agoapi: Add FreeBSD API support for MIPS platforms
Stanislav Galabov [Thu, 4 Feb 2016 10:13:44 +0000 (12:13 +0200)]
api: Add FreeBSD API support for MIPS platforms

This patch adds U-Boot API support (used by FreeBSD loader) for MIPS platforms.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
4 years ago.travis.yml: explicitly request sudo
Stephen Warren [Wed, 3 Feb 2016 17:41:34 +0000 (10:41 -0700)]
.travis.yml: explicitly request sudo

Without this, builds default to using new Travis CI infra-structure which
does no allow sudo. The builds need sudo in order to install the ELDK
compilers. Consequently, almost all builds fail without this.

I suspect that existing Travis CI users have not noticed this because
their accounts or builds have been grand-fathered into backwards-
compatible default settings, whereas I just set up a new build from
scratch and received new default settings.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Heiko Schocher <hs@denx.de>
4 years agorpi: set ethaddr as well
Lubomir Rintel [Wed, 3 Feb 2016 15:08:09 +0000 (16:08 +0100)]
rpi: set ethaddr as well

Let's set "ethaddr" when we get the ethernet address too, so that
fdt_fixup_ethernet() sets the address in the device tree and the Linux
driver can pick it up.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
4 years agocommon/memsize.c: Simplify RAM size detection
Eddy Petrișor [Tue, 2 Feb 2016 20:15:28 +0000 (22:15 +0200)]
common/memsize.c: Simplify RAM size detection

The case of memory of size 0 is not that different from a memory of any other
size, so we remove the duplicate code and treat the small differences when it
is the case.

Signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>
4 years agodefconfig: k2g_evm_defconfig: enable net driver model
Mugunthan V N [Tue, 2 Feb 2016 10:21:38 +0000 (15:51 +0530)]
defconfig: k2g_evm_defconfig: enable net driver model

enable net driver model for k2g evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agoARM: dts: k2g: Add keystone net dts files
Mugunthan V N [Tue, 2 Feb 2016 10:21:37 +0000 (15:51 +0530)]
ARM: dts: k2g: Add keystone net dts files

Add keystone net DT support for k2g evm.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agodefconfig: k2e_evm_defconfig: enable net driver model
Mugunthan V N [Tue, 2 Feb 2016 10:21:36 +0000 (15:51 +0530)]
defconfig: k2e_evm_defconfig: enable net driver model

enable net driver model for k2e evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agodefconfig: k2l_evm_defconfig: enable net driver model
Mugunthan V N [Tue, 2 Feb 2016 10:21:35 +0000 (15:51 +0530)]
defconfig: k2l_evm_defconfig: enable net driver model

enable net driver model for k2l evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agodefconfig: k2hk_evm_defconfig: enable net driver model
Mugunthan V N [Tue, 2 Feb 2016 10:21:34 +0000 (15:51 +0530)]
defconfig: k2hk_evm_defconfig: enable net driver model

enable net driver model for k2hk evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agodrivers: net: keystone_net: convert driver to adopt device driver model
Mugunthan V N [Tue, 2 Feb 2016 10:21:33 +0000 (15:51 +0530)]
drivers: net: keystone_net: convert driver to adopt device driver model

Adopt keystone_net driver to adopt device driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agodrivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH
Mugunthan V N [Tue, 2 Feb 2016 10:21:32 +0000 (15:51 +0530)]
drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETH

When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or
CONFIG_PHY_MICREL_KSZ9021 there  is a build error. Fixing this
by adding proper ifdefs

drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type
 static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
                                       ^
drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type
 static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
                                       ^
drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’:
drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type
  struct ksz90x1_ofcfg ofcfg[] = {
                       ^
drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function)
   { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
             ^
drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function)
   { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
             ^
drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration]
   ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
   ^
drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable]
  struct ksz90x1_ofcfg ofcfg[] = {
                       ^
drivers/net/phy/micrel.c: At top level:
drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable]
 static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
                                       ^
drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable]
 static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
                                       ^
scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed
make[1]: *** [drivers/net/phy/micrel.o] Error 1
Makefile:1201: recipe for target 'drivers/net/phy' failed
make: *** [drivers/net/phy] Error 2
make: *** Waiting for unfinished jobs....

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agoboard: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is defined
Mugunthan V N [Tue, 2 Feb 2016 10:21:31 +0000 (15:51 +0530)]
board: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is defined

remove board_eth_init when CONFIG_DM_ETH is defined

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agoOMAP3: omap3_logic: Remove YAFFS support.
Adam Ford [Mon, 1 Feb 2016 12:27:21 +0000 (06:27 -0600)]
OMAP3: omap3_logic: Remove YAFFS support.

UBIFS is the preferred FS, and YAFFS isn't officially included in
Linux.  Removing this feature reduces the code size.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agoOMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BIT
Adam Ford [Sun, 31 Jan 2016 23:13:33 +0000 (17:13 -0600)]
OMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BIT

The interface automatically converts one 32-bit word into two 16 words.
The README said it is permissible to use this flag in that scenario.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agoOMAP3: omap3_logic: Enable Android Fastboot
Adam Ford [Sun, 31 Jan 2016 19:34:39 +0000 (13:34 -0600)]
OMAP3: omap3_logic: Enable Android Fastboot

Android Fastboot requires USB.  The TWL4030 PMIC on omap3_logic handles USB traffic.
This patch sets up the USB gadget and Android Fastboot to match what is done in the
omap3_beagle project.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agodm: Update on current serial driver status
Simon Glass [Sun, 31 Jan 2016 16:16:17 +0000 (09:16 -0700)]
dm: Update on current serial driver status

Update the README to reflect the current status.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agodm: pxa: serial: Drop serial_sa1100 serial driver
Simon Glass [Sun, 31 Jan 2016 16:16:16 +0000 (09:16 -0700)]
dm: pxa: serial: Drop serial_sa1100 serial driver

This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agodm: serial: Drop serial_max3100 serial driver
Simon Glass [Sun, 31 Jan 2016 16:16:15 +0000 (09:16 -0700)]
dm: serial: Drop serial_max3100 serial driver

This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agodm: freescale: serial: Drop serial_imx serial driver
Simon Glass [Sun, 31 Jan 2016 16:16:14 +0000 (09:16 -0700)]
dm: freescale: serial: Drop serial_imx serial driver

This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agodm: opencores: Drop opencores_yanu serial driver
Simon Glass [Sun, 31 Jan 2016 16:16:13 +0000 (09:16 -0700)]
dm: opencores: Drop opencores_yanu serial driver

This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agodm: freescale: Drop mxs_auart serial driver
Simon Glass [Sun, 31 Jan 2016 16:16:12 +0000 (09:16 -0700)]
dm: freescale: Drop mxs_auart serial driver

This does not appear to be used, and has not been converted to driver model
by the deadline (doc/driver-model/serial-howto.txt).

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agoOMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting
Adam Ford [Sat, 30 Jan 2016 12:43:59 +0000 (06:43 -0600)]
OMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting

The defconfig patch will enable the the SPL and NAND settings.
The update to Kconfig will allow the SPL to configured in and
built.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agoOMAP3: Enable SPL on omap3_logic
Adam Ford [Sat, 30 Jan 2016 02:12:34 +0000 (20:12 -0600)]
OMAP3: Enable SPL on omap3_logic

Previously, Omap3_logic assumed X-loader was present.  With this
patch, we can finally replace X-loader with an MLO generated by
U-Boot.  This requires ECC to be setup to match the Linux Kernel
and the PBIAS confgured for the SD card.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agorpi: fix up Model B entries
Lubomir Rintel [Fri, 29 Jan 2016 08:35:52 +0000 (09:35 +0100)]
rpi: fix up Model B entries

The P5 header was not present on "Model B" any board prior to Revision 2.0,
there's no need for a separate device tree.

Also, it looks like "rev2" is incorrectly used to only cover the 512MiB
memory models; there also were 256MiB 2.0 boards.

I don't have all of the boards to check this, I'm following this table:
http://elinux.org/RPi_HardwareHistory#Board_Revision_History

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
4 years agorpi: link to another model number info source
Stephen Warren [Fri, 29 Jan 2016 05:24:44 +0000 (22:24 -0700)]
rpi: link to another model number info source

This source has been blessed by Dom Cobley at the RPi Foundation, so seems
like the best source to refer to. It's a superset of and consistent with
the other sources.

Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
4 years agohush: Add rudimentary support for PS1 and PS2
Marek Vasut [Wed, 27 Jan 2016 03:47:55 +0000 (04:47 +0100)]
hush: Add rudimentary support for PS1 and PS2

Add trivial support for changing the U-Boot command prompt string
by setting PS1 and PS2 environment variables. Only static variables
are supported.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agohush: Pull out U-Boot prompt display and read functionality
Marek Vasut [Wed, 27 Jan 2016 03:47:54 +0000 (04:47 +0100)]
hush: Pull out U-Boot prompt display and read functionality

Pull the code which displays U-Boot prompt and reads the command line
into a separate function. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoserial: serial_stm32: move clock config from driver to board
Vikas Manocha [Wed, 27 Jan 2016 02:12:20 +0000 (18:12 -0800)]
serial: serial_stm32: move clock config from driver to board

This patch removes the uart clock enable from serial driver & move it in the
board code.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agotest, tools: introduce tbot README
Heiko Schocher [Tue, 26 Jan 2016 07:42:48 +0000 (08:42 +0100)]
test, tools: introduce tbot README

introduce a README how to use tbot for testing U-Boot
and/or linux kernels.

Signed-off-by: Heiko Schocher <hs@denx.de>
4 years agoARM: omap3_logic: Fix pin muxing
Adam Ford [Fri, 22 Jan 2016 01:50:07 +0000 (19:50 -0600)]
ARM: omap3_logic: Fix pin muxing

Enhance pin muxing to enable more board features and reduce power
based on Tony's device tree work.

Signed-off-by: Adam Ford <aford173@gmail.com>
4 years agotools: env: update usage strings
Andreas Fenkart [Wed, 9 Dec 2015 12:13:27 +0000 (13:13 +0100)]
tools: env: update usage strings

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
4 years agotools: env: factor out parse_common_args
Andreas Fenkart [Wed, 9 Dec 2015 12:13:26 +0000 (13:13 +0100)]
tools: env: factor out parse_common_args

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
4 years agotools: env: shift optind arguments and fix argument indices
Andreas Fenkart [Wed, 9 Dec 2015 12:13:25 +0000 (13:13 +0100)]
tools: env: shift optind arguments and fix argument indices

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
4 years agotools: env: parse aes key / suppress flag into argument struct
Andreas Fenkart [Wed, 9 Dec 2015 12:13:24 +0000 (13:13 +0100)]
tools: env: parse aes key / suppress flag into argument struct

disabled original parsing, but not yet removed since the
argument indexing needs to be fixed

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
4 years agotools: env: introduce setenv/printenv argument structs
Andreas Fenkart [Wed, 9 Dec 2015 12:13:23 +0000 (13:13 +0100)]
tools: env: introduce setenv/printenv argument structs

goal is to use getopt for all argument parsing instead of adhoc
parsing in fw_getenv/fw_setenv functions

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
4 years agotools: env: make parse_aes_key stateless
Andreas Fenkart [Wed, 9 Dec 2015 12:13:22 +0000 (13:13 +0100)]
tools: env: make parse_aes_key stateless

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
4 years agotools: env validate: pass values as 0-based array
Andreas Fenkart [Wed, 9 Dec 2015 12:13:21 +0000 (13:13 +0100)]
tools: env validate: pass values as 0-based array

passing argv/argc can produce off-by-one errors

Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
4 years agoMerge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
Tom Rini [Mon, 8 Feb 2016 14:48:04 +0000 (09:48 -0500)]
Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging

4 years agoMerge branch 'master' of git://git.denx.de/u-boot-nios
Tom Rini [Mon, 8 Feb 2016 14:39:54 +0000 (09:39 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-nios

4 years agovideo: bcm2835: use bus_to_phys() on FB address
Stephen Warren [Sat, 6 Feb 2016 17:42:43 +0000 (10:42 -0700)]
video: bcm2835: use bus_to_phys() on FB address

The FB address is generated by the firmware running on the GPU/VideoCore
and is a "bus" address. This address is the other side of an IOMMU from
the ARM upon which U-Boot is running. Use bus_to_phys() to convert this
to an ARM physical address. Without this, U-Boot seems to work just fine,
but once the Linux kernel boots on an RPi2, accessing the FB memory often
causes a hard system hang.

This is related to:
122426d46e31 ARM: bcm2835: use phys_to_bus() for mbox
5c0beb5c58c8 usb: dwc2: use phys_to_bus/bus_to_phys
79340db7f1f6 ARM: bcm2835: implement phys_to_bus/bus_to_phys

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
4 years agonet: davinci_emac: fix NULL check after pointer dereference
Vishwas Srivastava [Tue, 26 Jan 2016 07:16:42 +0000 (12:46 +0530)]
net: davinci_emac: fix NULL check after pointer dereference

NULL check is made after the pointer dereference. This patch
fixes this issue.

Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
4 years agoppc: xilinx-ppc405-generic
Ricardo Ribalda [Thu, 4 Feb 2016 13:45:00 +0000 (14:45 +0100)]
ppc: xilinx-ppc405-generic

Fix device tree name:

+(xilinx-ppc405-generic) Device Tree Source is not correctly specified.
+(xilinx-ppc405-generic) Please define 'CONFIG_DEFAULT_DEVICE_TREE'
+(xilinx-ppc405-generic) or build with 'DEVICE_TREE=<device_tree>'
argument
+(xilinx-ppc405-generic) make[2]: ***
[arch/powerpc/dts/xilinx-ppc440-generic.dtb] Error 1
+(xilinx-ppc405-generic) make[1]: *** [dts] Error 2

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agonet: fix wrong initialization in davinci-emac driver
Vishwas Srivastava [Mon, 25 Jan 2016 15:58:17 +0000 (21:28 +0530)]
net: fix wrong initialization in davinci-emac driver

emac module of the davinci platform supports only 8 tx and 8
rx channels (total 16). emac driver for davinci platform,
however, while doing initialization of the dma descriptor
head pointers, wrongly initializes the 16 head pointers
(instead of  8) for tx dma and 16 head pointers (insted of 8)
for rx dma, which is wrong. The result is, that this register
initilization spills over the other registers which was not
intended and is undesirable. This patch fixes this problem.

Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
4 years agofdt: introduce fdtdec_get_child_count
Peng Fan [Mon, 1 Feb 2016 05:31:15 +0000 (13:31 +0800)]
fdt: introduce fdtdec_get_child_count

Introduce fdtdec_get_child_count for get the number of subnodes
of one parent node.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
4 years agorockchip: Drop old CONFIG_VIDEO_ROTATION option
Simon Glass [Sat, 30 Jan 2016 22:45:19 +0000 (15:45 -0700)]
rockchip: Drop old CONFIG_VIDEO_ROTATION option

The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards
were not updated. However this option is is not needed by default for
Rockchip since we don't need a rotated console for current boards. So just
remove the old option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agobzlib: Try another way to fix an unused variable
Simon Glass [Sat, 30 Jan 2016 22:45:18 +0000 (15:45 -0700)]
bzlib: Try another way to fix an unused variable

Use __maybe_unused which should avoid the Coverity error.

Reported-by: Coverity (CID: 134900)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agovideo: test: Adjust order of file closure
Simon Glass [Sat, 30 Jan 2016 22:45:17 +0000 (15:45 -0700)]
video: test: Adjust order of file closure

Close the file earlier to hopefully fix a Coverity error.

Reported-by: Coverity (CID: 134901)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agovideo: Use 'int' for loop variables instead of short
Simon Glass [Sat, 30 Jan 2016 22:45:16 +0000 (15:45 -0700)]
video: Use 'int' for loop variables instead of short

Using short doesn't save anything and is confusing when the width and height
variables are ulong.

This may fix Coverity CID134902 but I doubt it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agocmd: Fix control bmp_display()
Simon Glass [Sat, 30 Jan 2016 22:45:15 +0000 (15:45 -0700)]
cmd: Fix control bmp_display()

All paths should share the same return.

Reported-by: Coverity (CID:134903)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
4 years agomicroblaze: Correct build error in eth-uclass.c
Simon Glass [Sat, 30 Jan 2016 22:45:14 +0000 (15:45 -0700)]
microblaze: Correct build error in eth-uclass.c

This fixes the following error when building microblaze-generic:

net/eth-uclass.c: In function 'eth_post_probe':
net/eth-uclass.c:466:18: error: 'gd' undeclared (first use in this function)
    ops->start += gd->reloc_off;

Fixes: db9391e1 ("net: Move driver-model code into its own file")

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
4 years agoUse correct spelling of "U-Boot"
Bin Meng [Sat, 6 Feb 2016 03:30:11 +0000 (19:30 -0800)]
Use correct spelling of "U-Boot"

Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
4 years agonios2: set up the debug UART early
Thomas Chou [Wed, 30 Dec 2015 12:29:18 +0000 (20:29 +0800)]
nios2: set up the debug UART early

Set up the debug UART early if enabled, so that it is ready to use.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Chin Liang See <clsee@altera.com>
4 years agox86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLE
Bin Meng [Tue, 2 Feb 2016 13:58:09 +0000 (05:58 -0800)]
x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLE

Now that we have converted all x86 codes to DM PCI, drop pci_type1.c
which is only built for legacy PCI. Also per checkpatch.pl warning,
DEFINE_PCI_DEVICE_TABLE is now deprecated so drop that too.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agox86: Disable DM_PCI_COMPAT
Bin Meng [Tue, 2 Feb 2016 13:58:08 +0000 (05:58 -0800)]
x86: Disable DM_PCI_COMPAT

Now that all x86 codes have been converted to use proper DM PCI APIs,
it's time to disable the legacy compatible layer.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
4 years agodm: pci: Add missing forward declarations
Bin Meng [Tue, 2 Feb 2016 13:58:07 +0000 (05:58 -0800)]
dm: pci: Add missing forward declarations

When CONFIG_DM_PCI_COMPAT is not on, there is only a forward declaration
for pci_write_config32(). Add other missing ones.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agox86: chromebox_panther: Convert to use driver model ethernet
Bin Meng [Tue, 2 Feb 2016 13:58:06 +0000 (05:58 -0800)]
x86: chromebox_panther: Convert to use driver model ethernet

This board uses RTL8169 which is a driver model ethernet driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agox86: chromebox_panther: Drop the cache line size hack
Bin Meng [Tue, 2 Feb 2016 13:58:05 +0000 (05:58 -0800)]
x86: chromebox_panther: Drop the cache line size hack

Now that the RTL8169 driver warning is fixed we can drop this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoefi: app: Disable CONFIG_USB_EHCI_PCI
Bin Meng [Tue, 2 Feb 2016 13:58:04 +0000 (05:58 -0800)]
efi: app: Disable CONFIG_USB_EHCI_PCI

It does not build if without CONFIG_DM_PCI_COMPAT. For now we just
disable it, until some day we add USB support to EFI application.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoefi: app: Clean up defconfig
Bin Meng [Tue, 2 Feb 2016 13:58:03 +0000 (05:58 -0800)]
efi: app: Clean up defconfig

Move some #undef from efi-x86.h to efi-x86_defconfig as these are
already Kconfig options.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agox86: quark: Use Quark's own PCI config APIs
Bin Meng [Tue, 2 Feb 2016 13:58:02 +0000 (05:58 -0800)]
x86: quark: Use Quark's own PCI config APIs

There are still two places in Quark's MRC codes that use the generic
legacy PCI APIs, but as we are phasing out these legacy APIs, switch
to use Quark's own PCI config routines.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agonet: e1000: Convert to use DM PCI API
Bin Meng [Tue, 2 Feb 2016 13:58:01 +0000 (05:58 -0800)]
net: e1000: Convert to use DM PCI API

Update this driver to use proper DM PCI APIs.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agonet: designware: Use dm_pci_mem_to_phys() in the probe routine
Bin Meng [Tue, 2 Feb 2016 13:58:00 +0000 (05:58 -0800)]
net: designware: Use dm_pci_mem_to_phys() in the probe routine

Convert to use native DM PCI API dm_pci_mem_to_phys().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agonet: pch_gbe: Convert to use DM PCI API
Bin Meng [Tue, 2 Feb 2016 13:57:59 +0000 (05:57 -0800)]
net: pch_gbe: Convert to use DM PCI API

Use native DM PCI APIs instead of legacy compatible ones.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>